Digital cameras are based on a sensor that reacts to the light reflecting off the subject of the photo you are taking. A certain amount of light is required in order to get a good shot, and that optimum amount of light is basically the same in any situation.
The three things we have to play with to adjust the amount of light are shutter speed, aperture and ISO.
Shutter speed and aperture are closely related. If you increase the aperture (lower F-Stop number) more light gets to the sensor, so the shutter speed has to be increased to adjust the amount of light. Conversely, if you choose a small aperture (bit F-Stop number) then the shutter will have to stay open longer to let in more light. Think of filling a bathtub. If you open the tap all the way (aperture), the tub will fill in less time, and you will turn the water off sooner (shutter speed).
In order to get a good exposure, you need the right combination os aperture and shutter speed. Most cameras have settings where you can adjust one and the camera will automatically adjust the other to compensate and give you a great shot every time. If you have a more professional camera, you may be able to override this feature and choose both manually, and alas, some point and shoot models give you almost no freedom. I have one model that has no aperture settings at all.
In terms of exposure, a narrow aperture/slow shutter speed will give you the same result as a wide aperture/fast shutter speed combination, but varying the aperture also affects the depth of field (DoF) or how much of your subjects background will be in focus. If you are trying to achive a blurry background like in our cherry blossom shot above, you will want a narrow depth of field which can be achieved by choosing a wide aperture setting (low F-stop number), or if you can’t control that, and fast shutter speed, which will force the camera to change the settings to increase aperture.
ISO used to indicate the sensitivity of the film you were using. A high ISO film was more sensitive, and needed less light. Now that most of us are using digital cameras, the ISO setting is actually just a simulation. Increasing the ISO number will cause the camera to have a higher shutter speed which may result in a small depth of field, but use it in moderation, as you may see more digital noise with a highter ISO (that awful ‘grainy’ effect)
Once again, if you want to achive that ellusive blurry background:
Use the widest aperture (lowest F-stop) if you can control it. If not try a high shutter speed or high ISO setting
Have the subject as far away from the background as possible.
Try to get the subject as close as you can. If possible use the macro setting on your camera and take the subject just inches from the lens.
Thanks to Elizabeth Laurel for the great shot of last spring’s cherry blossoms!
Posted 3 years, 4 months ago at 10:40 pm. 2 comments
How to get a very fast shutter speed without getting underexposure?
I refer specifically to take a drop of water, so around 1/500s or faster. Always try to crank up the shutter speed, the picture is very dark. I am a very amateur photographer, for they do not have professional lights or anything. I have a Canon Rebel XSi, if it helps.
Open the aperture, increasing the ISO, to increase the light. Any of the three will help, but drops of water, rising with a flash light helps most.
Camera DCS620C Serial K620C-02363 Width 1152 Height 1728 Date 6/7/01 Time 4 18 03 DCS6XX Image FW Ver 3.2.3 TIFF Image Look Product Sharpening Requested Yes (Preferences) Counter [8879] Shutter 1/60 Aperture f– ISO Speed 200 Max Aperture f– Min Aperture f– Focal Length ?? Exposure Mode Manual (M) Meter Mode Center Weighted Drive Mode Single Focus Mode Manual (AF-M) Focus Point Center Flash Mode…
Camera DCS620C Serial K620C-02363 Width 1728 Height 1152 Date 7/7/01 Time 2 21 45 DCS6XX Image FW Ver 3.2.3 TIFF Image Look Product Sharpening Requested Yes (Preferences) Counter [9006] Shutter 1/60 Aperture f– ISO Speed 200 Max Aperture f– Min Aperture f– Focal Length ?? Exposure Mode Manual (M) Meter Mode Center Weighted Drive Mode Single Focus Mode Manual (AF-M) Focus Point Center Flash Mode…
Camera DCS620C Serial K620C-02363 Width 1728 Height 1152 Date 29/6/01 Time 4 53 37 DCS6XX Image FW Ver 3.2.3 TIFF Image Look Product Sharpening Requested Yes (Preferences) Counter [8544] Shutter 1/60 Aperture f– ISO Speed 200 Max Aperture f– Min Aperture f– Focal Length ?? Exposure Mode Manual (M) Meter Mode Center Weighted Drive Mode Single Focus Mode Manual (AF-M) Focus Point Center Flash Mod…
Experience TV programs, movies, games, and other video content with a 3D stereoscopic effect when you combine your compatible Mitsubishi HDTV with this 3D Starter Pack, which includes everything you need to start watching 3D video at home. It comes with a 3D Adapter with remote, two pair of Active 3D eyewear with matching emitter, and an HDMI cable. The Starter Pack also comes with a Disney Blu-ra…
Your guide and host professional photographer Emanuele “Manny” Pontoriero once again pushes you to take your technical skills beyond the creative horizon you currently have. Whether a serious amateur or a budding professional, you probably now realize that it’s not the camera but the person behind it that creates the stunning images we see in museums, art galleries and print ads. Now you can learn…
Capture the Fun! (create Excitement) with ultimate style ,convenience style and quality. The pocket-sized ergonamic design makes it convienient to keep anywhere. All team camears are loaded with 400 high speed film. Team mames/logos are trademarks of the teams indicated, all other NFL- related trademarks are trademarks of the National Football Leauge What are the camera specifications? FLASH Film …
3D Technology Checklist This product is 3D-related. To help you get a great 3D experience, use the checklist below to ensure you have everything you need. 3D viewing requires: A DisplayFirst, you’ll need a 3D-ready display–whether it’s a 3D HDTV, 3D projector, or 3D computer monitor. These displays have more processing power than standard 2D models for displaying 3D images in rapid success…
Digital cameras are based on a sensor that reacts to the light reflecting off the subject of the photo you are taking. A certain amount of light is required in order to get a good shot, and that optimum amount of light is basically the same in any situation.
![Samsung UN60D7000 60-Inch 1080p 240 Hz 3D LED HDTV, Silver [2011 MODEL]](http://photo-lifestyle.com/send.php?i=aHR0cDovL2VjeC5pbWFnZXMtYW1hem9uLmNvbS9pbWFnZXMvSS8zMXZObUYlMkI5MHNMLl9TTDE2MF8uanBn)
